Reformatting The Micro Sd Card - Midland XTC 450 Instruction Manual

Reformatting the Micro SD card

Note: Before the first usage Format the microSD card fol-
lowing this procedure
The micro SD card can be reformatted while in the came-
ra. This allows you to completely delete all the files at one
time. Follow these steps:
1. Press and hold the format button
2. Move the RECORD switch to the forward/ON position.
3. The camera will beep 4 times and the icon will alternate
blinking red and blue
When complete, the camera will beep twice, then turn off.
Rotating Lens
To maintain upright orientation for your video when the
camera is mounted at an angle, the XTC450's lens can ro-
tate 180° in one direction and -90° in the other. There are
indentations every 90° to enable you to twist the lens into
place at commonly used angles.
External Microphone
To connect your camera to an external microphone, first open
the rubber cover and then insert the 3.5mm microphone jack
into the plug. If you are using a headset, the left speaker will
be used as the microphone. In addition, you may also connect
an mp3 player to directly record music to your video.
Midland XTC450 - 16
Battery
The included lithium-ion battery comes partially charged.
To charge, connect the included micro USB cable to camera
and connect the other end of the cable to a power source
such as a computer, wall charger or vehicle charger. No da-
mage will occur to the camera or battery if used prior to a
full charge. See page 20 for battery status indications.