Error Codes; Before You Call For Service - Haier HLC1700AXW User Manual

TROUBLE
Door will not open
after completion of
a dry cycle
(Door lock is activated)

ERROR CODES

ERROR
CODE
The washer cannot drain
E1
the water within 4 minutes.
Cannot lock the door after
E2
20s.
After 8 minutes, the
E4 selected water level has
not been reached.
F7 Motor circuit error
The water is above the
E8
warning level.
Dryer sensor circuit
F9
problem.
Water level sensor circuit
FA
problem.
No feedback signal from driver
FC
unit.
Fd The dryer heating is abnormal.
FE The dryer motor is abnormal.
Unb Unbalanced load

BEFORE YOU CALL FOR SERVICE

IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED SERVICE
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE UNIT YOURSELF.
POSSIBLE CAUSE
The temperature inside has not
cooled down to a safe temperature.
SYMPTOM
POSSIBLE REMEDY
Wait for the inside temperature
to cool down. The cooling time
can take several minutes.
ACTION TO
TAKE
Clear the pump.
Stop running
Service Needed.
Stop running Service Needed.
Check plumbing and
Stop running water hose connections.
Service Needed
Stop running Service Needed
Stop running Service Needed
Stop running Service Needed
Stop running Service Needed
Stop running Service Needed
Stop running Service Needed
Stop running Service Needed
Spin low speed
Evenly distribute clothing
and cancel
in the wash basket.
drying
SOLUTION
31