Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPTION AND MAIN APPLICATIONS
These are the competitive models against main competition products. Three types
of 10mm cordless driver drill are 9.6V, 12V and 14.4V applications.
Their benefits are:
Comfortable handle shape, light-weight and well balanced body.
Durable motor that carbon replacement is possible without disassembling the
machine.
New variable-speed switch has a large stroke in variable speed range, that makes
speed control easy.
Changeover of rotation direction can be selected by one hand thanks to the
convenient one-touch push-button switch.
Large capacity battery (2.0Ah) can be replaced easily by push-button mechanism
S
pecifications
Model
Voltage
Current
Battery (Ni-cd battery)
Fast charger
No load
High
speed
Low
Chucking ability
Drilling
Iron material
capacity
Wood material
Torque adjustment
Max.tightening torque
Clutch actuating torque
Net Weight
S
tandard equipment
Phillips and slotted bits 2-45
Battery cover
---------------------------------------------2
O
ptional accessories
Drill------------------1.5,
Wood drill
----------9, 12, 15
Phillips bit ----------1-65, 2-45, 2-65, 2-110, 2-150, 2-250, 3-45, 3-65, 3-110
Slotted bit
-----------5-45, 5-82, 6-70, 6.35-45, 8-45, 8-70,
Socket bit
-----------7-55, 8-55, 10-55
Foam polishing pad 125, Rubber pad assembly, wool bonnet 100
Fast charger DC1410
Battery 9122 (6203DWAE), Battery 1222 (6213DWAE), Battery 1422 (6233DWA, 6233 DWAE)
6233D
Cordless driver drill
233 mm
241 mm
6213DA
94 mm
6203DWAE
DC 9.6V
9122x2units
0-1200 min.
0-400 min.
230kgf·cm (16.6ft·lbs)
5-50kgf·cm (0.4-3.6ft·lbs)
1.7kg (3.8lbs)
------------------------2
2, 3, 4, 5, 6
233 mm
94 mm
6213DWAE
DC 12V
2.0 Ah
9122x2units
DC1410
0-1400 min.
0-450 min.
1.0 (1/32") - 10 (3/8")
10mm (3/8")
25.4mm (1")
17-step + direct
260kgf·cm (18.8ft·lbs)
5-50kgf·cm (0.4-3.6ft·lbs)
1.9kg (4.2lbs)
New Tool
233 mm
77 mm
246 mm
6233DA
6203DWA 6203DWAE
DC 14.4V
1422x1unit
1422x2units
0-1300 min.
0-400 min.
310kgf·cm (22.4ft·lbs)
10-60kgf·cm (0.7-4.3ft·lbs)
2.0kg (4.4lbs)
241 mm
6203DA
Advertisement
Related Manuals for Makita 6203DWAE
Summary of Contents for Makita 6203DWAE
- Page 1 Phillips bit ----------1-65, 2-45, 2-65, 2-110, 2-150, 2-250, 3-45, 3-65, 3-110 Slotted bit -----------5-45, 5-82, 6-70, 6.35-45, 8-45, 8-70, Socket bit -----------7-55, 8-55, 10-55 Foam polishing pad 125, Rubber pad assembly, wool bonnet 100 Fast charger DC1410 Battery 9122 (6203DWAE), Battery 1222 (6213DWAE), Battery 1422 (6233DWA, 6233 DWAE)
-
Page 2: Features And Benefits
Carbon brush can be replaced during whole lifetime of motor. (Actual weight is 100g lower than (conpetion's motor expires when carbon brush is replaced once.) conpetition's product.) Motor life (estimated): Makita #6213D is 500 hours conpetition's product is 100 hours Push-button switch for changing Carbon brush can rotating... - Page 3 epair Disassembly Remove drill chuck before replacing gear assembly. Drill chuck should not be removed when disassembling th housing only. Take care that compression spring in the speed change lever would fly out. Speed change lever Compression spring Figure 1 Handling of auxiliary gear assembly Dispose machine screw that fixes the motor bracket as this is used for temporary fitting at the time of transportation.
- Page 4 Mounting of leaf spring Mount leaf spring to housing L as shown in the figure 4. Coat grease to the leaf spring to prevent it from falling off at the time of assembly. Insert both ends of leaf spring into concave part. Leaf spring Inside of left housing...
-
Page 5: Wiring Diagram
Mounting of chuck Check that change ring is mounted on the specified position. (See page 5/6 (6).) Mount the chuck following the procedures below. 1) Set the chuck on sleeve 10. 2) Mount hexagonal rod to the chuck and fix it with a vice. 3) Set drill mode to forward and slow.