Selecting A Source; Tuning In A Radio Station - Boston Duo-i Plus Owner's Manual

Selecting a Source
Using the Front Panel Controls
IT]
Turn the
MODE
control until the
source you want is highlighted
with brackets. Note that other
function and alarm setting control
icons also may be selected.
[!]
Press the
MODE
control to select
the highlighted item. Or just wait
a few seconds and the source is
automatically selected. The Duo-i
plus
begins playing the source selected.
Using the Remote Control
Press the button for the source you
want to select. Press the FM and
AUX buttons once for FM 1 or AUX 1 and twice for FM 2 or AUX 2.
Notes:
• The iPod source can be selected only when your iPhone/iPod is in the dock.
• There are FM 1 and FM 2 source options. They correspond to the two FM radio preset groups.
• There are Aux 1 and Aux 2 source options. Aux 1 is the front panel input. The Aux 2 input is on the rear
panel.
Tuning In a Radio Station
Using the Front Panel Controls
IT]
Use the
MODE
control to select
the AM radio source or one of the
FM radio sources.
[!]
Turn the
TUNE
control until the
station frequency you want shows
in the display.
Using the Remote Control
IT]
Press the AM
or
FM radio source
button.
[!]
Press the'" or
~
button once
to step up or down the. radio band
to the next station frequency.
Notes:
• If the radio source you want is already selected you can skip step
IT]
and use the front panel
TUNE
control
or the remote'" or
~
buttons to tune in a new station.
• If the station you select has been assigned to a station preset, the preset indicator and number are
displayed.
7