Table of Contents
Advertisement
Setting an Alarm
If you plan to use the wake to music function, note that the last source and volume level
settings will be used for this alarm.
IT]
Press the ALARM 1
or
ALARM 2 buttons one or more times to
turn on the alarm and set the alarm type. One press selects
wake to music
II.
A second press selects wake to tone
B.
A third press selects both. Press the button a fourth time to
cancel the alarm.
This example shows how the display might look after the Duo-i
p1us
r.I
6~:"\.
~~1
O.
\\~
is turned off. The current time is displayed and the icons show Alarm 1
~
~
is on set for wake to music and tone and Alarm
2 is on set to tone only.
~M~
ThM~
(0 ·0:/\!t0' (0)
How the Alarms Work
When an alarm is triggered the icon for the alarm starts flashing.
If you selected wake to tone, the alarm tone starts sounding, quietly at first then with increasing volume.
If you selected wake to music with a radio, the station you last tuned to is played at a gradually increasing
volume
If you selected wake to music from your iPhone/iPod, the selected song is played at a gradually
increasing volume.
If you selected wake to music and tone, the radio station or iPod song you selected begins playing at a
gradually increasing volume. If you do not turn off the music source alarm after five minutes the music stops
playing and the alarms tone begins to sound at a gradually increasing volume.
To turn off the alarm press the POWERNOLUME control.
The Snooze Feature
If you want to sleep a while longer after the alarm sounds
you can use the "Snooze" feature. Simply touch the
outer metal rim around the Duo-i
p1u
,.
This will delay the
alarm for ten minutes. Each additional touch of the rim
increases the length of the "Snooze" alarm delay by 5
minutes. The maximum delay is 60 minutes. The display
shows the time and a flashing Alarm icon.
Touch Sensitive Rim
--
-'
·O~-·
@-
-@
(C!> 0
(!)
0 0)
-·0
0"
To see how much "Snooze"time is left touch the metal rim once. If you touch the rim again another five
minutes is added to the"Snooze"time for each additional touch.
To cancel the "Snooze" function press the alarm 1 or alarm 2 button for the active Alarm or the POWER/
VOLUME button.
12
Advertisement
Table of Contents
