Miele DA 3566 Operating And Installation Instructions page 41

 Screw the brackets onto the right and
left inside walls of the housing unit so
that they are flush with the bottom
edges of the unit. The brackets are
designed for 16 and 19 mm thick unit
sides. Orientate the bracket so that
the vertical depth matches the thick‐
ness of the unit side, as shown.
 Fit the screws for attaching the cook‐
er hood so that they protrude by
about 5 mm, as shown. Only use the
front screws when fitting a 900 mm
wide cooker hood in a 600 mm wide
wall unit.
Installation
41