Networking; Intellitroll Use - Cannon DIGI-TROLL 5 Owner's Manual

AnglingOutpost.com
AnglingOutpost.com
Networking your Digi-Trolls
Up to six Digi-Troll series downriggers can be networked together with the CannonLink accessory. To network your
downriggers you will need the Relay Cable Accessory (019634) between each downrigger you would like to link.
The CannonLink cable will install to the Data In connector on the fi rst downrigger. Connect all other downriggers
by connecting the Relay Cable Accessory from the Data Out to the Data In of the next downrigger. A terminator is
needed on the last downrigger Data Out in order for the downriggers to properly communicate. This terminator is
included in the CannonLink accessory.
FIGURE 28
Optional Intellitroll Accessory
The Digi-Troll series is compatible with the Cannon Intellitroll Speed and Temp sensor. The Intellitroll sensor gives
the user the speed, temperature, and depth at the weight. The Digi-Troll 5 downriggers are compatible with the Intel-
litrol but only when connected to the CannonLink system. The Digi-Troll 5 will pass the Intellitrol data to the Hummin-
bird fi shfi nder for display on the fi shfi nder screen.
1-888-356-5022
DATA OUT
CIRCUIT BREAKER
POWER CABLE
DATA IN
2 3
www.cannondownriggers.com
1-888-356-5022