Main Menu (Signal Status Meters); Audio Input/Output Meters And Lkfs Display; Agc/Processing Meters; Gpi Status Display - Linear Acoustic AERO.lite User Manual

3.1

Main Menu (Signal Status Meters)

3.1.1 Audio Input/Output Meters and LKFS Display

Shows input and output audio levels on the left and right channels, and the current
loudness LKFS loudness measurements.
Figure 3-2 Input/Output Meters and LKFS Display

3.1.2 AGC/Processing Meters

Shows the amount of gain expansion or reduction of the wideband input AGC (W) and
each band of the multiband AGC's (1-5). The stationary horizontal line in each band
represents 0dB - the center of the meter's range. Meters above this line indicate
expansion; meters below it indicate compression (gain reduction). More downward
excursion of the meters represents more gain reduction is being applied.
Figure 3-3 Processing Meters

3.1.3 GPI Status Display

Shows the current status of each of the four General Purpose Inputs, plus the current
(active) preset.
Figure 3-4 GPI Status Display

3.1.4 GPO Status Display

Shows the current status of each of the four General Purpose outputs.