Using The Remote Control - HoMedics Professional HEPA Instruction Manual

IB-AR20GB-1212-01_Layout 1 11/12/2012 17:06 Page 7

USING THE REMOTE CONTROL

Battery Installation
One CR2032 3V battery is included with the remote control. To activate the remote control functions, pull out
the plastic pull tab protruding from the remote control housing. To change the battery, remove the battery
door at the back of the remote by squeezing the tab and pulling the door away from the back of the remote.
Please insert the battery into the remote with the positive side up as shown on the drawer.
NOTE: Always keep the battery and remote control out of the reach of children.
Bottom of Remote
PULL
BEFORE
USE
Power ON/OFF
Speed Settings
Timer Settings
7