Turning Off The Power Automatically - JVC UX-G50 Instructions Manual

Turning Off the Power
Remote
Automatically
ONLY
To turn off the System after playback is over—
Auto Standby
This function works only when the source is CD.
A.STANDBY
Canceled
(No indication)
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the disc playback stops, the A.STBY indicator starts
flashing.
If no disc operation is done for about 3 minutes while the
indicator is flashing, the System turns off (stands by)
automatically.
To turn off the System after a certain period of
time—Sleep Timer
1
Specify the time (in minutes).
SLEEP
10 20
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
SLEEP
• If you press the button repeatedly, you can change the shut-
off time.
17
A.STBY
30 60 90 120
OFF
(Canceled)