Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EyESonic ES-3233-S -
Summary of Contents for EyESonic ES-3233-S -
- Page 1 Network Video Recorder Quick Operation Guide ...
-
Page 2: Table Of Contents
Quick Operation Guide TABLE OF CONTENTS NVR Pre-Installation ............................2 NVR Installation .............................. 2 Hard Disk Installation ............................. 2 Front Panel ............................... 4 Rear Panel ................................ 5 Specification ..............................6 Specifications of HNR30P Series ......................6 ... -
Page 3: Nvr Pre-Installation
Quick Operation Guide Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to the models listed in the following table. Series Model Type HNR30P HNR30P4-4 Network Video Recorder HNR30P8-8 HNR30P8-16... - Page 4 Quick Operation Guide Connect the power cable to the HDD. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. Re-install the cover of the NVR and fasten screws.
-
Page 5: Front Panel
Quick Operation Guide Front Panel HNR30P Series ① Status Indicator(Power, Status, Tx/Rx) ② USB Interface... -
Page 6: Rear Panel
Quick Operation Guide Rear Panel HNR30P Item Description Connector for LAN (Local Area Network). LAN Network Interface Connects to RS-485 devices. RS-485 Interface 100~240VAC power supply Power Supply Switch for turning on/off the device. Power Switch Universal Serial Bus (USB) ports for additional devices such as USB USB Interface mouse and USB Hard Disk Drive (HDD). -
Page 7: Specification
Quick Operation Guide Specification Specifications of HNR30P Series Model HNR30P4-4 HNR30P8-8 HNR30P8-16 4-ch 8-ch 16-ch IP video input Video/Audio input Two-way audio 1-ch, RCA (2.0 Vp-p, 1kΩ) input Incoming 20Mbps 40Mbps 80Mbps bandwidth 40Mbps Network Output bandwidth Remote connection Recording 5MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF resolution 1-ch, resolution:... - Page 8 Quick Operation Guide ≤ 2 Kg ( without hard disk) Weight...
-
Page 9: Hdd Storage Calculation Chart
Quick Operation Guide HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K 256K 112M 320K 140M... -
Page 10: Accessing By Web Browser
Quick Operation Guide Accessing by Web Browser Logging In You can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button. Notes: 1. -
Page 11: Recording
Quick Operation Guide PTZ Control: Pan, tilt, zoom operations are supported, as well as preset editing and calling. PTZ function can only be realized if the connected camera supports PTZ control. Note: Video Parameters Configuration: Brightness, contrast, saturation and hue of the image can be modified. Start Live View Steps: In the live view window, select a playing window by clicking the mouse. - Page 12 Quick Operation Guide Choose the day in a week to configure scheduled recording. Click Edit to edit record schedule. Configure All Day or Customize record: If you want to configure the all-day recording, please check the All Day checkbox. If you want to record in different time sections, check the Customize checkbox. Set the Start Time and End Time.
-
Page 13: Playback
Quick Operation Guide Click Save to validate the above settings. Playback Interface Introduction Channel List: Displays the list of channels and the playing status of each channel. Playback Window: Displays the image of channel. Play Control Bar: Play control operations are supported. Time Line: Displays the time bar and the records marked with different colors. -
Page 14: Log
Quick Operation Guide You can view and export the log files at any time, including operation, alarm, exception and information of device. Before you start The Log function can be realized only when the device is connected with HDD or network disk. And make sure the HDD or network disk has been initialized for the first time to use. -
Page 15: Menu Operation
Quick Operation Guide Menu Operation Menu Structure Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR: 1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device. -
Page 16: Live View
Quick Operation Guide After the device starting up, the wizard will guide you through the initial settings, including modifying password, date and time settings, network settings, HDD initializing, and recording. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible. - Page 17 Quick Operation Guide If the user name and password is changed, the auto adding of IP camera will be failed, you may add it Note: manually. • Manual Steps: To add the online cameras with same network segment: The detected online camera will be listed in the camera list, as shown in the figure below. Click the button to add the camera.
-
Page 18: Record Settings
Quick Operation Guide (Custom) interface. (2) You can edit the IP address, protocol, management port, and other information of the IP camera to be added. (3) Click Add to add the camera. Record Settings Before you start: Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to the user manual for detailed information. -
Page 19: Playback
Quick Operation Guide And click the Yes button in the popup Attention message box to confirm the settings. Then all the channels will start to record in the selected mode. Playback Play back the record files of a specific channel in the live view menu. Channel switch is supported. •... -
Page 20: Backup
Quick Operation Guide Under multi-screen live view, record files of the top left channel (not masked) will be played back. Playback management. The toolbar in the bottom part of Playback interface can be used to control playing process. Just check the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels. - Page 21 Quick Operation Guide Check backup result. Choose the record file in Export interface and press button to check it. 0203041030715...
Need help?
Do you have a question about the ES-3233-S - and is the answer not in the manual?
Questions and answers