Advertisement
SAY HELLO TO YOUR
SHINY NEW MODEM
BEFORE YOU INSTALL AND CONNECT YOUR MODEM, TAKE A MOMENT TO FAMILIARISE
YOURSELF WITH THE FRONT AND BACK PANELS OF THE MODEM.
FRONT PANEL
The front panel of your WiFi Cable Modem provides status LED's that indicate how
well and in what state your WiFi Cable Modem is operating. See below table for more
information on front panel LED status indicator functions.
1
2
3
4
WHAT DO THE LIGHTS MEAN?
1. POWER
ON, power is applied to the WiFi Cable Modem
2. DS
ON, the WiFi Cable Modem is receiving data from the Cable network
3. US
ON, the WiFi Cable Modem is sending data to the Cable network
ON, the WiFi Cable Modem is registered on the network and
4. ONLINE
fully operational
ON, a device is connected to one of the Ethernet ports
5. ETHERNET
BLINKING indicates that data is being transferred over the
1-4
Ethernet connection
ON, a device is connected to the USB port
BLINKING indicates that data is being transferred over the USB
connection
6. USB
Note: Your service does not support data connections via USB,
please connect your computer via the Ethernet port to ensure
optimal connection speed
ON, the Wireless Access Point is operational
BLINKING indicates that data is being transferred over the wireless
7. WIRELESS
connection
LINK
OFF indicates that the wireless access point has been disabled
by the user
OFF (normal condition) wireless setup is not active
8. WIRELESS
BLINKING indicates that user has activated wireless setup to add
SETUP
new wireless clients on the wireless network
ON indicates telephony service is enabled. Blinks when line 1 is in use
9. TEL1
OFF indicates that phone service for TEL 1 is not enabled
ON indicates telephony service is enabled. Blinks when line 2 is in use
10. TEL2
OFF indicates that phone service for TEL 2 is not enabled
2
5
6 7
8
9 10
DPQ3925
Advertisement
