Snmp Platform Event Traps; Software Problems - Dell OptiPlex GX400 User Manual

Possible system board resource and/or
hardware failure
Possible system board resource and/or
hardware failure
Possible expansion card failure or
conflict
Possible system board resource and/or
hardware failure
Normal operating condition after POST

SNMP Platform Event Traps

Your system generates simple network management protocol (SNMP) platform event trap (PET) messages that are sent to network management software to
inform the network manager that specific events have occurred on your system.
The following table lists the SNMP platform event traps your system generates.
SNMP Platform Event Traps
Description Code
BIOS boot failure 02 03 23 6f 00
Chassis intrusion 02 03 05 6f 00
Temperature failure 02 03 01 06 01
Invalid password 02 03 06 6f 01
Voltage failure 02 03 02 06 01
SOS enable / PC presence 02 03 25 6f 00

Software Problems

This section provides general guidelines for analyzing software problems. For detailed troubleshooting information on a particular program, see the
documentation that accompanied the software or consult the support service for the software.
If your system is behaving erratically, back up your files immediately. If your system has a tape drive installed, see the documentation that came with the tape
backup software for instructions on performing a backup operation. Otherwise, see your operating system documentation for information on backing up data
files.
Basic Checks:
Ensure that the application program is compatible with the operating system installed in your computer and that your computer meets the minimum
l
hardware requirements needed to run the software.
Ensure that you properly installed and configured the application program. Reinstall the program if necessary.
l
Consult the software documentation or contact the software manufacturer for detailed troubleshooting information on a particular application program.
Ensure that you have not made an error while entering data.
l
If the problem is still not resolved,
Perform the procedure in "System Board
Perform the procedure in "System Board
Perform the procedure in "Expansion-Card
Perform the procedure in "System Board
No action is necessary.
contact Dell for technical assistance.
Problems" and see "Hardware
Problems" and see "Hardware
Problems" and see "Hardware
Problems" and see "Hardware
Conflicts."
Conflicts."
Conflicts."
Conflicts."