1070 Fan Assembly - Lenovo G41-35 Hardware Maintenance Manual

1070 Fan assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 32
• "1020 Base cover" on page 33
Figure 7. Removal steps of fan assembly
Unplug the fan connector in the direction shown by arrow 1. Then remove the
screws 2.
Note: Be careful not to damage the connector.
Step Screw (quantity)
M2 × 6 mm, Phillips-head, nylok-coated (3)
2
Fan + MB
When installing: Make sure that the connector is attached firmly.
Lenovo G41-35/G51-35
2
2
2
1
Color Torque
Black 1.5 ~ 2.0 kgf*cm
41