Samsung UBD-K8500 User Manual page 25

| NOTE |
\ To view the password as you enter it, use the
arrow buttons to select Show Password on
the right side, and then press OK button.
7. When finished, select Done and then press
the OK button. The product verifies the
network connection and then connects to the
network.
8. When verification is complete, select OK, and
then press the OK button.
| NOTE |
\ You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1. Follow the directions in Wireless - Automatic
through Step 5.
2. The product searches for a network, and then
displays the connection failed message.
3. On the bottom of the screen, select IP
Settings, and then press the OK button.
The IP Settings screen appears.
4. Select the IP Settings field, and then press
the OK button.
5. Select Enter manually in the IP Settings
field, and then press the OK button.
6. Select a parameter to enter (IP Address, for
example), and then press the OK button.
Use the buttons on the remote control
to enter the numbers for the parameter.
Use the buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the OK button.
7. Press the
parameter, and then enter the numbers for
that parameter following the instructions in
Step 6.
8. Repeat Steps 6 and 7 until you have filled in
all parameters.
| NOTE |
\ You can get the Network parameters from your
Internet provider.
9. When finished, select OK, and then press the
OK button. The Security Screen appears.
10. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter letters by
selecting a letter with the
and then pressing the OK button.
11. When finished, select Done at the right of the
screen, and then press the OK button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network, select
OK, and then press the OK button.
WPS(PBC)
Ğ
1. In the Home screen, select Settings, and
then press the OK button.
2. Select Network, and then press the OK
button.
3. Select Network Settings, and then press the
OK button.
4. Select Wireless in the Network Settings
screen, and then press the OK button.
5. Press the
press the
6. Press the OK button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
25
English
or button to move to another
buttons,
button on your remote, and then
button to select WPS(PBC).