GE 14846 User Manual page 4

6. Use your hammer and lightly tap in the
supplied drywall anchors until they are fl ush
with receptacle.
7. Use your Phillips screwdriver. Screw in
the screws provided until they stick out
about 1/16".
8. Mount the antenna onto the screws by
lining up the keyhole slots on the back of the
antenna with the screws.
a. Be sure you have routed the coax cable
in the direction you want the cable to go by
using the cable channel on the bottom of
the antenna.
Easy Installation for Analog TVs with Set-Top Box
1. Connect the coax cable from the antenna directly
to the set-top box antenna input.
2. Connect another coax cable (not included) from
the set-top box output directly to the antenna
input on your TV.
3. Run a channel scan on your set-top box, following
your set-top box instruction manual.
Easy Installation for Today's HDTVs
1. Connect the coax cable from the antenna directly
to the antenna input on your HDTV.
2. Run a channel scan on your television, following
your TV's instruction manual.
4