Software - ADS PYRO 1394 Installation Manual

Software:

USB 2.0 Drive Kit Software:
• For Windows 98/98SE/ME/2000/XP Insert the CD and follow directions to
install the driver. If you do not have a USB 2.0 host card your USB 2.0
Drive Kit will run at USB 1.1 speeds.
• For MAC 9.X/OS X No drivers are required. Since Apple does not support
USB 2.0 at this time your Mac will run at USB 1.1 speeds.
PYRO 1394 Drive Kit Software:
• For Windows 98Second Edition Insert the CD and install the
Windows 98 SE update. For Windows ME/2000/XP no software
installation is required. 1394 Storage is not supported in
Windows 98 Gold.
• For MAC 9.X Install the HDST software from the CD and restart
your MAC.
• For OS X No drivers are required.
Once the software has been properly installed, turn on your drive kit (green
switch in the back), plug one end of the USB 2.0 or 1394 cable into the
Drive case. With the computer running, plug the remaining end of the cable
into your computer's available 1394/FireWire port for PYRO 1394 DRIVE
KIT users or a USB 2.0 Port/USB 1.1 Port for USB 2.0 Drive Kit owners.
If all the software was installed correctly, your drive kit should mount at
this point. Some drives need to be partitioned or formated before they can
mount properly.
Things to Remember:
• The Drive Kit is not a portable device, it should be handled with care.
• Do not unplug the Drive Kit FireWire/USB cable without safely
un-mounting or ejecting the drive first.
Drive Kit Installation Manual 7