Drive Installation - English - ADS PYRO 1394 Installation Manual

Installation manual for the PYRO 1394 Drive Kit and USB 2.0 Drive Kit:
* Caution: Sharp metal parts inside. Care must be taken to prevent injury.
STEP 1:
Remove the black/grey plastic shell
from the Drive Kit case by pulling it
away from the front of the drive case.
STEP 2:
Now remove the metal protective
shield from the top of the Drive Kit's
internal module by sliding it away
from the front of the drive case.
STEP 3:
Set the Hard Drive or CD ROM drive's jumper to "MASTER" or single drive
setting (Western Digital). For more information about jumper settings refer
to the documentation of the drive you are installing.
Drive Kit Installation Manual 4
Drive Installation