Exit Mototalk; Set A Channel; Set A Code - Motorola r765 User Manual

channel you are set to appears on the third
line of the display.
Note: When switching from the network to
MOTOtalk, the last channel and code that
were set appear on the MOTOtalk idle screen.
While in MOTOtalk, this icon m appears on
the display, indicating that there is no network
signal and MOTOtalk is active.

exit MOTOtalk

1 From the MOTOtalk idle screen, press
M.
2 Scroll to MT Options and press r.
3 Select Exit MOTOtalk.
Switching to Network Please Wait displays. After a few
seconds, the network idle screen appears.
TM
94 MOTOtalk

set a channel

1 From the MOTOtalk idle screen, press -
under Edit.
2 Scroll to Channel.
3 Press - under Edit.
4 Select a channel.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.

set a code

1 From the MOTOtalk idle screen, press -
under Edit.
2 Scroll to Code.
3 Press - under Edit.
4 Select a code.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.