Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ATD Tools Manuals
  4. Impact Driver
  5. ATD-2106
  6. Owner's manual

ATD Tools ATD-2106 Owner's Manual

1/2" composite air impact wrench
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
ATD-2106
1/2" Composite Air Impact Wrench
Owners Manual
SPECIFICATIONS:
Square Drive........................................................................1/2" (12.7mm)
Bolt Capacity...........................................................................3/4" (19mm)
Free Speed..................................................................................7,500 RPM
Max Torque............................................................1,290 -lbs (1,750Nm)
Required Air Pressure......................................................90 PSI (6.3 BAR)
Average Air Consump on...........................................4.3cfm (122 l/min)
Noise Level........................................................................................90 dba
Air Inlet..................................................................................................1/4"
Hose Size................................................................................................3/8"
Net Weight...........................................................................4.6lbs (2.1kgs)
Length....................................................................................7.7" (196mm)
California Prop 65 WARNING:
This product contains chemicals including lead, known to the State of
California to cause cancer, birth defects, or other reprod
MADE IN TAIWAN TO ATD TOOLS, INC. SPECIFICATIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATD-2106 and is the answer not in the manual?

Questions and answers

Related Manuals for ATD Tools ATD-2106

Summary of Contents for ATD Tools ATD-2106

  • Page 1 Air Inlet…………………………………………………………………….……………….1/4” Hose Size…………………………………………………………………………….……..3/8” Net Weight………………………………………………………………...4.6lbs (2.1kgs) Length……………………………………………………………………...…7.7” (196mm) California Prop 65 WARNING: This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other reprod MADE IN TAIWAN TO ATD TOOLS, INC. SPECIFICATIONS...

  • Page 2: General Safety Warnings

    CA Prop 65 Warning: WARNING: This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other reproduc ve harm. Wash hands er handling. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construc on a vi es contains chemicals known to the State of California to cause cancer, birth defects, or other reproduc ve harm.
  • Page 3 WARNING: Keep bystanders and children out of the work area while opera ng this tool. WARNING: Always keep your work area clean, unclu red, and well lit. Clu ered or dark areas invite accidents and injuries. DO NOT work on oor surfaces that are slippery. WARNING: Do not operate this tool if you are red or under the in uence of alcohol, drugs, or medica ons that could a ect your ability to use the tool properly.
  • Page 4 NOTE: Typical Air Supply Installa on Always use clean, dry air. Dust, corrosive fumes and/or water in the airline will cause damage to the tool. Drain the air tank daily. Clean the air inlet lter screen on at least a weekly schedule. The recommended hook up procedure can be viewed in the above gure.

  • Page 5: Care And Maintenance

    Care and Maintenance The tool should be lubricated daily (or before each use) with air tool oil (not included). NOTE Air tool oil is available at major hardware stores. oiled every 1 to 2 hours. This may be done using an in-line oiler or manually. If done manually, proceed as follows: 1.
  • Page 6 CORRECTIVE ACTION PROBLEM POSSIBLE CAUSE A) Add diesel fuel into air inlet to Tool runs slowly down rit or gum in motor ush motor. And then add air tool or doesn't work oil to lubricate it. B) Disassemble tool & repair it Check the compressor gauge and Low air pressure adjust the compressor regulator...
  • Page 7 ATD-2106...
  • Page 8 ATD-2106 ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION PRT2106-01 HAMMER CASE PRT2106-24 WASHER PRT2106-02 INSERTS RECOIL (M5) PRT2106-25 AIR CHANNEL GASKET PRT2106-03 GREASE FITTING (1/8”) PRT2106-26 MOTOR HOUSING PRT2106-04 ANVIL BUSHING PRT2106-27 REGULATOR KNOB PRT2106-05 FRONT GASKET...

  • Page 9: Warranty

    I PT NUM R:_________________________________________ Your ATD-2106 is warranted for a period of 12 months from the original date of sale. Any consumable items are covered by a 90 day warranty. This warranty is valid for defects in workmanship or materials only and is handled at the point of sale.