Parts Inventory - ELECRAFT KXB30 Assembly And Operating Instructions Manual

Parts Inventory

i
Caution: Diodes D1 and D2 can be damaged by static discharge. Before handling
these parts, put on an anti-static wrist strap or touch any grounded, unpainted metal
surface.
The table below lists all parts in the kit. The KX1 Owner's manual has photographs of similar parts.
Ref.
C3 Capacitor, 68 pF ("68" or "680")
C4, C5 Capacitor, 0.1 µF ("104")
C1, C2 Capacitor, 1-40 pF trimmer
D1, D2 Diode, PIN, precision, 5082-3081 (glass)
R4, R5 Resistor, 1 k, 1/8-W, 5% (brown-black-red)
L1, L2, L3 Miniature RF choke, 47 µH (yellow-violet-black)
Note: L1-L3 may be labeled R1-R3 on the PC board.
MISC KXAT1 PC board
MISC Solid, insulated hookup wire, green
MISC Rubber bumper, .04" thick x 0.3" square
Parts Placement Drawing
A drawing showing the locations of components on the KXB30 board can be found in Appendix F of the
KX1 Owner's Manual.
Description
2
Qty Part No.
1 E530150
2 E530020
2 E540002
2 R560014
2 E500116
3 E690043
1 E100184
1 ft. E760008
2 E980017