Windows 2000 Domain Controller Setup; Services Installation - Linksys LAPAC1750 User Manual

• webserver (IIS)
• RADIUS Server (Internet Authentication Service)
• Certificate Authority

Windows 2000 Domain Controller Setup

1. Run dcpromo.exe from the command prompt.
2. Follow all of the default prompts, ensure that DNS is installed and enabled during
installation.

Services Installation

1. Select the Control Panel > Add/Remove Programs.
2. Click Add/Remove Windows Components from the left side.
3. Ensure that the following components are selected.
Certificate Services—After enabling this, you will see a warning that the computer
•
cannot be renamed and joined after installing certificate services. Select Yes to
select certificate services and continue
World Wide Web Server—Select World Wide Web Server on the Internet
•
Information Services (IIS) component.
From the Networking Services category, select Dynamic Host Configuration
•
Protocol (DHCP), and Internet Authentication Service (DNS should already be
selected and installed).
4. Click Next.
5. Select Enterprise root CA, and click Next.
107