Panasonic DMP-B15 Operating Instructions Manual page 33

"Picture"
Still Mode [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback
( 48, Frames and fields).
Seamless Play [DVD-VR]
Select the play mode between playlist chapter segments and
partially deleted titles.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
"Sound"
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V]
[DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (
Digital Audio Output
≥Press [OK] to show the following settings.
For details on digital output (
Dolby D/Dolby D +/
Dolby TrueHD
DTS/DTS-HD
MPEG Audio
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" is
set to "Bitstream", there are no downmix effects for the outputted
audio.
≥The audio will be outputted in "Stereo" in the following cases:
j AVCHD playback
j Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
48) for late night viewing.
37)
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in "Bitstream" or
"PCM" format.
≥Not making the proper settings may
result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take precedence over
this unit and audio selected in these
items may not be output (e.g., when
a television is connected, the HDMI
audio output of this unit is limited to
down-mixed 2ch.)
[BD-V]
17)
≥Automatic
Select if jittering occurs when "Automatic" is
≥Field:
selected. (The picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be
seen clearly when "Automatic" is selected. (The
picture is clearer and finer.)
The chapters in playlists are played seamlessly.
≥On:
This does not work while searching or when
there are several audio types included on the
playlist. Additionally, the positioning of chapter
segments may change slightly.
The points where chapters in playlists change
≥Off:
are played accurately, but the picture may freeze
for a moment.
NTSC discs are played as NTSC.
≥NTSC:
Select if picture is not displayed correctly when
≥PAL60:
"NTSC" is selected.
≥On ≥Off
≥Bitstream:
Select "Bitstream" when the connected equipment can
decode the respective audio format.
j Connect equipment supporting HDMI (High Bit rate
Audio) and use a High Speed HDMI Cable in order to
output high bit rate audio such as Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio or DTS-
HD Master Audio.
≥PCM:
Select "PCM" when the connected equipment cannot
decode the respective audio format.
Refer to the operating instructions for connected devices to
verify whether or not they can decode each of the audio
formats.
When connected to equipment with a
≥Bitstream:
built-in MPEG decoder.
When connected to equipment without a
≥PCM:
built-in MPEG decoder.
The primary audio and secondary audio are
≥On:
mixed and output. The sampling frequency is
converted to 48 kHz.
≥Off: The button click sound on the menu and
secondary audio are not output.
When connected to equipment that does
≥Stereo:
not support the virtual surround function.
≥Surround encoded:When connected to equipment that
supports the virtual surround function (to
convert 2-channel to multi channel
surround).
33
RQT9338