Volume Settings; Transferring Calls; Redial Key; Speakerphone Key - Intelbras TIP 300 Installation Manual

6.3. Volume settings

Audio volume
During a conversation, press volume + or – to adjust the volume. To activate the
Mute function, press Mute . An icon will appear on the display and audio will
not be transmitted to the user at the other end of the call. To re-establish the
audio, press Mute again.
Ring volume
In Idle mode, press volume + or – to adjust the volume of the ringer.

6.4. Transferring calls

If you are on a call and wish to transfer it to another VoIP number, press Flash , type
in the desired VoIP number and then hang up.
Note: consult with your VoIP operator about availability.

6.5. Redial key

Calls the last number dialed.

6.6. Speakerphone key

Allows you to talk without using the handset. When you dial a number without
picking up the handset, the icon will appear on the display and the speaker-
phone will be activated.
To place the IP telephone on speakerphone without first dialing a number, press
and then dial the desired number.
For an incoming call, press to answer it using the speakerphone.
To end the call,press again and the icon will disappear.
Or
To use the phone, lift the handset from the base and the Speakerphone function
will be disabled automatically.
47