Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
•
adjustable spanner or metric spanner set.
Remove any internal components or packaging from the barbecue body.
•
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
•
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
•
barbecue.
1
B1
Attach the Body Handle (B4) onto the Barbecue Body (B1) using the M6x15 bolts
(D1x2pcs), M6 washers (D2X2pcs) and M6 Nuts(D3x2pcs) as shown.
2
C4
Insert the Front Leg (C1) into the leg support of the barbecue body. then insert the angled end
of Leg Support Rack (C4) into the end hole near the end of the front leg.
B4
C1
5
D1
D2
D3