1. Manuals
  2. Brands
  3. K-EIKO Manuals
  4. Power Tool
  5. EJS120PV
  6. Operator's manual

K-EIKO EJS120PV Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INDUSTRIAL POWER TOOLS
MODEL EJS120PV
• Nonskid large soft grip handle
• Easy-to-operate large trigger switch
(equipped with speed control dial)
• Powerful dust blowing allows a clear view of
the ink line
• Compact and lightweight
OPERATOR'S MANUAL
Please retain this information for future reference
Jig Saw
WARNING: THE SAFETY INFORMATION
GIVEN INSIDE MUST BE READ AND
UNDERSTOOD BY ANY PERSON
USING, INSTALLING, REPAIRING
OR MAINTAINING THESE
TOOLS.

Advertisement

Table of Contents
loading

Summary of Contents for K-EIKO EJS120PV

  • Page 1 INDUSTRIAL POWER TOOLS Jig Saw MODEL EJS120PV • Nonskid large soft grip handle • Easy-to-operate large trigger switch (equipped with speed control dial) • Powerful dust blowing allows a clear view of the ink line • Compact and lightweight WARNING: THE SAFETY INFORMATION...

  • Page 2: General Safety Rules

    d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part WARNING! of the power tool may result in personal injury. Read all instructions e) Do not overreach.

  • Page 3: Specifications

    SPECIFICATIONS Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V) Power input 400W* Wood: 65mm Max. cutting depth Mild steel: 6mm –1 No-load speed 0 – 3000 min Stroke 18mm Min. cutting radius 25mm Weight (without cord) 1.5kg * Be sure to check the nameplate on product as it is subject to change by areas. STANDARD ACCESSORIES MOUNTING THE BLADE (1) Blade No.31 ..............

  • Page 4: Adjusting The Guide Roller

    (2) Rotate with the hexagonal bar wrench inserted and secure as shown in Fig. 2. Main unit Fig. 4 Hexagonal bar wrench CHIP COVER POSITIONING Fig. 2 1. Chip cover Use the chip cover to reduce flying of cut particles and to easily operate the saw.

  • Page 5: Adjusting The Blade Operating Speed

    CAUTION ADJUSTING THE BLADE OPERATING SPEED Set the base in the front position when using the splinter guard. The blade operating speed can be adjusted within a 2. Cutting a circle or a circular arc –1 range of 0 to 3000 min according to the degree that the To ensure efficient cutting, employ the optional trigger switch is depressed.

  • Page 6: Selection Of Blades

    6. Angular cutting 7. Dust produced in operation Set the chip cover to the first step. (Fig. 5) CAUTION To adjust the angle of inclination; loosen the base To prevent accidents, turn the switch off and remove bottom screw, shift the base position to the side the plug from the power supply when not in use.

  • Page 7: Maintenance And Inspection

    6. Service parts list CAUTION Repair, modification and inspection of K-EIKO Power Acceptable blades Tools must be carried out by an K-EIKO Authorized Service Center. This Parts List will be helpful if presented with the tool to the K-EIKO Authorized Service Center when requesting repair or other maintenance.
  • Page 8 IMPORTANT Correct connection of the plug The wires of the main lead are coloured in accordance with the following code: Blue –Neutral Brown : –Live As the colours of the wires in the main lead of this tool may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire coloured blue must be connected to the terminal marked with the letter N or coloured black.
  • Page 12 EC DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with standards or standardized documents EN60745, EN55014 and EN61000-3 in accordance with Council Directives 73/23/EEC, 89/336/EEC and 98/37/EC. Manufactured for KENNEDY TOOLS Wigston Works, Leicester, England. ISO 9002 REGISTERED COMPANY Signed: Date: 31 January 2007...

Table of Contents