HUSTLER 3700 Operator's Manual page 54

Hustler 3700 Technical Specifications
Sound Measurements (dBA):
Sound Power per
Hemisphere method
(ISO 3744 - 1994 & 11094 - 1991)
Guaranteed Sound Power Level
928713CE / 928721CE – 105 dBA
928713CE / 928754CE – 105 dBA
928713CE / 928739CE – 105 dBA
Operator Ear
928713CE / 928721CE – 86.5 dBA
928713CE / 928754CE – 86.3 dBA
928713CE / 928739CE – 88.3 dBA
Engine RPM
928713CE / 928721CE – 2700 (± 50) RPM's
928713CE / 928754CE – 2700 (± 50) RPM's
928713CE / 928739CE – 2700 (± 50) RPM's
Vibration:
(Maximum weighted acceleration m/s2 - whole body)
928713CE / 928721CE – <0.5 m/s
928713CE / 928754CE – 0.6 m/s²
928713CE / 928739CE – 0.5 m/s²
Whole body - The RMS acceleration in m/s² measured on 3 minutes on a representative machine. The acceleration value depends
upon the roughness of the ground, the speed at which the tractor is operating and the operator driving habits. Measurements were
obtained thru actual field data according to STD Procedure in ISO 2631-1-1997.
Hand/Arm -
928713CE / 928721CE – The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s². These values were
obtained through hand/arm measure per ISO 5349-1-2001.
928713CE / 928754CE – The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s². These values were
obtained through hand/arm measure per ISO 5349-1-2001.
928713CE / 928739CE – The RMS acceleration in m/s² measured in 24 seconds is less than 2.5 m/s². These values were
obtained through hand/arm measure per ISO 5349-1-2001.
Test was performed on a static (stationery) machine.
REV F
2
5-2 109627CE_0512