Table of Contents
Advertisement
4. Talking/Monitoring
R To talk to the visitor if the paged party does not
answer:
: Touch [Talk to visitor].
: Press
4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone.
1
: From the top menu, touch
R When there are multiple devices displayed, touch
the number of the doorphone that you want to
monitor with (A) and then the image (B).
Example: When there are both doorphones and
cameras.
A
: Press
.
R When there are multiple devices displayed:
: Select the destination. ®
2
The images from the doorphone are displayed.
R Press
3
To end the operation, press
Features available while monitoring
– Adjust wide/zoom and pan/tilt settings (®
page 33)
– Adjust sound and display settings (® page 33)
– Record monitored images (® page 20)
Note:
R The sound from your end will not be heard at the
doorphone.
R Monitoring time:
: About 90 seconds (can be extended up to 3
minutes by performing operations during monitoring)
18
.
.
B
(
to speak to the monitored party.
.
: About 3 minutes
4.4 Talking between the main
monitor and the sub monitor
Intercom calls between the main monitor and the sub
monitor can be made.
– When using multiple sub monitors, you can make
intercom calls between the sub monitors.
To make calls
1.
: From the top menu, touch
R When there are multiple devices that can be
selected, select the device. To call all devices,
touch [Call all together].
: Press
R When there are multiple devices that can be
selected:
: Select the device.
*1 To call all devices, select "Call all together".
2. Page the other party.
3. Talk with the paged party when they answer the call.
4. To end the operation, press
To receive calls
– This operation is the same for the main monitor and
sub monitor.
)
1. When the intercom call is received, press
to talk to the paging party.
Note:
R Paging automatically ends after about 30 seconds
and intercom calls automatically end after about 90
seconds.
.
*1
®
(
.
.
)
Advertisement
Table of Contents
