Usb Rec; Hdmi Cec Protocol - Panasonic DVD-S48 Operating Instructions Manual

USB REC

You can copy audio fi les (CD-DA) from a CD on a
USB device into MP3 format.
Connect the USB device.
1
Play an audio CD.
2
During play, press USB REC.
3
Press w q to select "YES", and press OK.
4
USB REC
Speed
OPTIONS
Bitrate
TRACKS
Create ID3 tag
START
Storage
QUIT
Press e r w q to select "TRACKS".
5
• In the default setting, all tracks are checked.
• To remove each check mark, select the track
by pressing e r w q, and press OK.
• To clear all the check marks, select the
check mark at the top and press OK.
USB REC
OPTIONS
TRACKS
START
QUIT
Press e r w q to select "START", and press
6
OK to begin copying.
• You can change to preferred settings in the
"OPTIONS" menu.
• To exit the menu, select "QUIT", and then
press OK.
10
OPTIONS
Normal
128kbps
YES
USB
TITLE LENGTH
TRACK1 0:18
TRACK2 0:21
TRACK3 0:21
TRACK4 0:16
TRACK5 0:13
TRACK6 0:12
TRACK7 0:13
TRACK8 0:20
TRACK9 0:22

HDMI CEC protocol

(DVD-S68 only)
The DVD player supports HDMI CEC (Consumer
Electronics Control) protocol.
Panasonic does not guarantee 100 %
interoperability with all HDMI CEC devices.
• Set "HDMI CEC" to "On" (
One Touch Play
When a video disc is placed in the unit and you
press ^, it turns on the TV, then disc play starts.
System Standby
When you turn off the TV, all connected
HDMI CEC devices switch to standby mode
simultaneously.
Control with TV's remote control
The ability to control "Playback Control", "Disc
Menu Control" and "Device Select".
For details, see the Operating Instructions for
your TV.
page 11).