Satel SZW-02 User Manual

I. PURPOSE

The SZW-02 indoor code lock is designed to control the alarm systems (by initiating time
delay, arming/disarming the system), or electromagnetic door fasteners, or any other
devices with current consumption up to 2A. Made to the advanced Surface Mount
Technology (SMD), the indoor code lock has an aesthetic plastic casing with illuminated
silicone keypad. It is only suitable be installed in closed spaces.

II. TECHNICAL DESCRIPTION

Fig. 1.
The lock has three LEDs which indicate its current state and help to program the basic
functions.
SYSTEM (yellow) LED controlled from outside, its function to be determined by the
–
installer.
ON (red) LED indicates active state of the lock.
–
OFF (green) LED indicates inactive state of the lock.
–
The control function is performed by making or breaking the lock contacts (terminals C-C).
The lock state can be changed by entering the valid access code (composed of up to 12
digits) and pressing the [#] key. The lock can be operated by means of two access codes,
one of them being the service code, which enables the programmed operating parameters
to be changed.
Entering an invalid access code generates a warning two-beep signal. In the event an
invalid code is entered three times, the ALM output is activated. Entering the valid code
deactivates the ALM output.
®
USER MANUAL
1 2 3
4 5 6
7 8 9
0 #
General view of the code lock.
INDOOR CODE LOCK
SZW-02
(Program Version 2.0)
SYSTEM
ON
OFF
szw02_en 08/08