The following table describes the LEDs.
Table 1. Front panel LEDs
LED
2.4 GHz Link Rate LED
5 GHz Link Rate LED
LAN LEDs
(1 through 5)
AC1200 WiFi Range Extender
Description
Green. The 2.4 GHz WiFi connection between the extender and the WiFi
router is optimum.
Note:
If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
Amber. The 2.4 GHz WiFi connection between the extender and the WiFi
router is good.
Note:
This LED also lights amber during the startup process of the extender.
After about one minute, the LED lights green or turns off, depending on the
WiFi connection between the extender and the WiFi network.
Red. The 2.4 GHz WiFi connection between the extender and the WiFi router
is poor.
Off. The extender and the WiFi router do not have a 2.4 GHz WiFi connection.
Green. The 5 GHz WiFi connection between the extender and the WiFi router
is optimum.
Note:
If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
Amber. The 5 GHz WiFi connection between the extender and the WiFi router
is good.
Note:
This LED also lights amber during the startup process of the extender.
After about one minute, the LED lights green or turns off, depending on the
WiFi connection between the extender and the WiFi network.
Red. The 5 GHz WiFi connection between the extender and the WiFi router is
poor.
Off. The extender and the WiFi router do not have a 5 GHz WiFi connection.
Green. An Ethernet device is connected to the LAN port.
Off. No Ethernet device is connected to the LAN port.
Overview
8