Playing Photo Contents; Appendix; Troubleshooting - Samsung BD-J5500 User Manual

7. When done, press the TOOLS
button and then select the Copy
to USB using the ▲▼ buttons.
and then press the v button. The
Copy to USB pop-up appears.
8. Use the ▲▼ buttons to select the
device to store the copied files, and
then press the v button.
NOTES
✎
Do not disconnect the device while copying is
`
in progress.
9. If you want to cancel copying,
press the v button and then
select Yes. Select No to continue
copying.
10. When copying is complete, the
"Copying completed." message
appears. Press the v button to
go back to the Playback screen.
NOTES
✎
This function may not be supported by some
`
discs.
On the Copying screen, you can also choose
`
Select All and Deselect All.
Use Select All to select all item. This
-
cancels your individual item selections.
Use Deselect all to deselect all selected
-
item at once.
20

Playing Photo Contents

You can control the playback of photo
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
Using the Tools Menu
During playback, press the TOOLS
button.
Start Slide Show/
Select to start or stop the
Stop Slide Show
slide show.
Select to set a slide show's
Slide Show Speed
speed.
Background
Select to listen to music while
Music
viewing a slide show.
Select to enlarge the current
Zoom
picture. (Enlarge up to 4
times)
Select to rotate the picture.
(This will rotate the picture
Rotate
either clockwise or counter
clockwise.)
Shows the picture
Information
information.
NOTES
✎
Depending on the disc or storage device, the
`
Tools menu may differ.
To enable the background music function, the
`
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
You can't enlarge the subtitle and PG graphic
`
in the full screen mode.

Appendix

Troubleshooting

Before requesting service, please try the following solutions.
PROBLEM
No operation can be performed • Check the batteries in the remote control. They may need replacing.
with the remote control.
• Operate the remote control at a distance of no more than 6.1m from
the player.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to
reset it. Reinstall batteries and try to operate the remote control
again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear. • Ensure that the disc has disc menus.
The prohibition message appears • This message appears when an invalid button is pressed.
on the screen.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g.,
angles).
• You've requested a title or chapter number or search time that is out
of range.
Play mode differs from the Setup • Some of the functions selected in the Setup Menu may not work
Menu selection. properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be • The Screen Ratio is fixed on your Blu-ray Disc/DVD.
changed.
• This is not a problem with the player.
No audio. • Make sure you have selected the correct Digital Output in the Audio
Options Menu.
The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the ^ button (on front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD
data is deleted.
SOLUTION