Media Play; Playing A Commercially; Recorded Disc; Playing Files On A Usb Device - Samsung BD-J5500 User Manual

Software upgrades using the USB Host jack
`
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player
to your network, and then set Auto
Upgrade Notification on, the player
automatically notifies you when a new
software version is available for the
player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade Notification,
and then press the v button.
2. Use the ▲▼ buttons to select On,
and then press the v button.
If there is a new software version
available, the player notifies you with a
popup message.
1. To upgrade the firmware, select
Yes in the Pop-up. The player turns
off automatically, then restarts, and
begins the download. (Never turn
the player on or off manually during
an upgrade.)
2. The update progress popup
appears.
3. When the update is completed, the
player will restart automatically.
NOTES
✎
The upgrade is complete when the player
`
turns off, and then turns on again by itself.
16
Never turn the player off or on manually
`
during the update process.
Samsung Electronics takes no legal
`
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during software
upgrade.
Contact Samsung
Provides contact information for
assistance with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory
defaults except for the network
settings.

Media Play

Playing a Commercially

Recorded Disc

1. Press the 8 button to open the
disc tray.
2. Place a disc gently into the disc
tray with the disc's label facing up.
3. Press the 8 button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB
Device
There are two methods you can use to
play or view multimedia files located on
a USB device through your player.
Method 1
1. Turn the player on.
2. Connect the USB device to the
USB port on the front panel of the
player. The New Device Connected
pop-up appears.
PLAY DISC PHOTOS VIDEOS MUSIC
New device connected.
123
Photos
Videos
No Disc
Music
Move Enter Return
> " '
App 1 App 2 App 3 App 4 App 5
Change Device Settings
NOTES
✎
If the pop-up does not appear, go to Method 2.
`
3. Use the ▲▼ buttons to select
Photos, Videos or Music, and
then press the v button. The
Photos, Videos & Music screen
appears listing the content of the
device. Depending on how the
contents is arranged, you will see
either folders, individual files, or
both.
NOTES
✎
Even though the player will display folders for
`
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and going to Step 3 in
Method 2 below.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
5. Select a file to view or play, and
then press the v button.
6. Press the RETURN button to exit a
folder or the EXIT button to return
to the Home screen.
7. Go to pages 18~20 for instructions
that explain how to control
playback of videos, music, and
pictures on a USB device.