Push Button Configuration (Pbc) - D-Link DWA-131 User Manual

Section 2 - Installation

Push Button Configuration (PBC)

Select "Use the WiFi Proctected Setup (WPS)" to initiate the configuration and
click Next.
To connect to your network using the WPS push button configuration method,
click the virtual button as shown in the screenshot.
Note: You may also connect to your network by pressing the WPS button on the
adapter and holding for two seconds until the wizard screen comes up. Then, press
the WPS button on the router/access point to continue.
Press the WPS button on your access point or wireless router within 2 minutes
to establish connectivity.
D-Link DWA-131 User Manual 16