Specification; Application Range; Module Specification; Test Method - LG M227WD Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.

1. Application Range.

This spec sheet is applied to the 22" LCD Monitor TV used
LD84G chassis.

2. Specification

Each part is tested as below without special appointment
2.1 Temperature : 25±5°C(77±9°F), CST : 40±5°C
2.2 Relative Humidity : 65±10%
2.3 Power Voltage : Standard input voltage
(100~240V@ 50/60Hz)
• Standard Voltage of each products is marked by models
2.4 Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM .
2.5 The receiver must be operated for about 5 minutes prior to
the adjustment.

4. Module Specification

4.1 M227WD-PZJ : AUO, M215HW01-V0( P/N : EAJ55729601)
No Item
1 Type
2 Diagonal Size
3 Active Display area
4 Outline Dimension
5 Aspect Ratio
6 Pixel Number
7 Pixel Pitch
8 Color arrangement
9 Color Depth
10 Electrical Interface
11 Surface Treatment
12 Operating Mode
13 Backlight Unit
14 Response Time
15 Color Gamut
Copyright 2008 LG Electronics. Inc. All right reserved.
C
Only for training and service purposes
SPECIFICATION

3. Test method

3.1 Performance : LGE TV test method followed.
3.2 Demanded other specification
Specification
TFT Color LCD Module
21.53 inches (546.86mm) diagonal
476.64 (H) x 268.11 (V)
495.6(H) x292.2(V) x 16.35(D)
16:9
1920 x RGB x 1080
0.24825(H) x 0.24825(V)
RGB vertical Stripe
16.7M color (6bit with Hi-FRC)
LVDS
Hard coating(3H) & Anti-glare(Haze 25)
Normally White
4 CCFL(4 lamps)
Rising Time : 3.8 + Falling Time : 1.2
Normal 72% Panel(CIE1931)
- 6 -
Safety : CE, IEC specification
EMC : CE, IEC
Unit Remark
mm
mm Typ.
pixel
mm
ms Typ.
LGE Internal Use Only