Specifications - Ferris HydroCut 5900111 Operator's Manual

Transaxle drive walk-behind mower
Hide thumbs Also See for HydroCut 5900111:
Table of Contents

Advertisement

NOTE: Specifications are correct at time of printing and are subject to change without notice.
ENGINE:
13 HP* Kawasaki Manual Start
Make
Kawasaki
Model
FH381V
Horsepower
13 @ 3600 rpm
Displacement
26.30 Cu. in (431 cc)
Electrical System
12 Volt Clutch Coil, 13 amp
Oil Capacity
3.2 pt. ( 1.5L) w/ Filter
13 HP* Kawasaki Electric Start
Make
Kawasaki
Model
FH381V
Horsepower
13 @ 3600 rpm
Displacement
26.30 Cu. in (431 cc)
Electrical System
12 Volt Clutch Coil, 13 amp
Oil Capacity
3.2 pt. ( 1.5L) w/ Filter
CHASSIS:
Fuel Tanks
Capacity: 4 Gallons (15.1 L)
Rear Wheels
Tire Size: 16 x 6.50 -12
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels
Tire Size: 9 x 3.5 - 6
Inflation Pressure: 25 psi (1,72 bar)
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be
lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given
both the wide array of products on which engines are placed, and the variety of environmental issues applicable
to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors including, but
not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.
TRANSMISSION:
HydroGear 334
Type
Unitized Drive Transaxle
Hydraulic Fluid
HydroGear 20W-50 oil
Speeds
Forward: 0-5.5 MPH (0-8.85 km/h)
@ 3400 rpm
Reverse: 0-2 MPH (0-3.22 km/h)
Continuous Torque
160 ft. lbs. (217 N.m.)
Output
Maximum Weight
620 lbs. (281 Kg)
on Axle
DIMENSIONS:
32" Model
Overall Length
74" (188 cm)
Overall Width
41" (104 cm)
Height
41" (104 cm)
Weight (apx..)
330 lbs. (150 kg)
36" Model
Overall Length
72" (183 cm)
Overall Width
48" (122 cm)
Height
41" (104 cm)
Weight (apx..)
355 lbs. (161 kg)

Specifications

37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydrocut 5900604Hydrocut 5901037

Table of Contents