Advertisement
Connect to the Network and Power
1 Plug the Ethernet cable from the home network connection into
the HDMI switch's IP control port.
2 Connect the included power adapter into the switch's power
connector. When the power adapter is connected, the HDMI
switch powers on.
Set Up the Connections
Use Composer Pro to set up the bindings. See the Composer Pro User
Guide for details, or refer to the Documentation tab in the device driver.
NOTE:
A zone must be locked to enable 3D features and
multi-channel audio (including lossless formats).
Network Switch
HDBaseT Receiver
Using the HDBaseT Receiver
Indicators
Source Device
(example: controller)
HDMI (output)
LAN (pass-through)
RS232
IR (pass-through)
HDCP video (solid=HDCP-protected
video passing through, flashing=un-
protected video, o =no video)
HDBaseT link (solid=active,
steady flash=power saving,
random flickering/o =error)
Power (slow blink=power on)
3
Advertisement
