Set Station Duration Times - Rain Bird ISM Instruction Manual

Set Station Duration
1. Turn the Programming Dial to SET STATION
DURATION.
2. The program letter (A, B or C), the number
"1" (indicating the station number), and "0"
appear in the display.
3. Press the (+) or (-) buttons to set the
amount of time you want it to run for
station number 1. You can set a station to
run from 0 minutes up to 240 minutes
(four hours), in one-minute increments. All
durations display in minutes (for example,
a two hour duration will appear as 120
minutes).
NOTE: If you do not want to include a
particular station in the selected
program, set that station's duration
to zero "0".
4. Press Enter to display additional stations.
Repeat steps 3 and 4 to set a duration for
each station.
You have now completed all programming
ISM Installation, Programming & Operation Guide
steps for one program. If you are finished
programming, turn the Programming Dial to
the SYSTEM ON position to run all programs
automatically. If you want to enter settings for
another program, repeat the programming
instructions, beginning with "Select Program
(A, B or C)" on page 19.
Page 25