Making Settings In The "Volume" Menu; Making Settings In The "Clock" Menu - Blaupunkt FREIBURG 130 Operating And Installation Instructions

DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 – 16.
u Press the On/Off button
setting.
u Turn the volume control
display brightness.
SCROLL
Select the display of scrolling text (e. g. when
displaying MP3 fi le names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
u Press the On/Off button
setting.
u Turn the volume control
tween the settings.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: 1 – 50.
u Press the On/Off button
setting.
u Turn the volume control
power-on volume.
LAST VOL
If you select the setting LAST VOL, every time you
switch on the radio, the volume level that was set
the last time you switched the radio off is activated
again. Settings: ON, OFF.
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
was switched off .
Always set the device to a moderate volume.
3
to change the
4
to set the desired
3
to change the
4
to change be-
3
to change the
4
to set the desired
u Press the On/Off button
setting.
u Turn the volume control
tween the settings.
TA VOLUME (traffi c announcement volume)
(only for reception area EUROPE)
Setting the minimum volume for traffi c announce-
ments. Settings: 1 – 50.
u Press the On/Off button
setting.
u Turn the volume control
BEEP
Switching the confi rmation beep on or off . Set-
tings: ON, OFF.
Note:
When storing radio stations, a confi rma-
tion beep sounds even if the OFF setting is
selected.
u Press the On/Off button
setting.
u Turn the volume control
tween the settings.
Making settings in the "CLOCK"
menu
CLK DISP
Switch the permanent display of the time on or off .
Settings: ON, OFF.
u Press the On/Off button
setting.
u Turn the volume control
tween the settings.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
User settings
3
to change the
4
to change be-
3
to change the
4
to set the volume.
3
to change the
4
to change be-
3
to change the
4
to change be-
17