Str-Dg720 Qq - Sony STR-DG720 Service Manual

STR-DG720
QQ
3 7 63 1515 0
Name Function
G DTS/
"DTS" lights up when the
DTS-ES/
receiver is decoding DTS
DTS 96/24 signals.
"DTS-ES" lights up when the
receiver is decoding DTS-ES
signals.
"DTS 96/24" lights up when
the receiver is decoding DTS
96/24 (96 kHz/24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 68).
H MEMORY
Lights up when a memory
function, such as Preset
Memory (page 59), etc., is
activated.
I Tuner
Lights up when using the
indicators receiver to tune in radio
stations (page 57), etc.
Note
"RDS" appears for models of
area code CEL, CEK only.
J Preset
Lights up when using the
station
receiver to tune in radio
indicators stations you have preset. For
details on presetting radio
stations, see page 58.
K D.RANGE
Lights up when dynamic range
compression is activated (page
38).
L NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 52).
M COAX
Lights up when INPUT MODE
is set to "AUTO" and the
source signal is a digital signal
being input through the
COAXIAL jack (page 68).
N HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 20).
TE
L 13942296513
8 GB
F VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/ Connects to a VCR,
White (L)
OUT jacks DVD player, etc.
(page 17–24).
Red (R)
VIDEO IN/
Yellow
OUT* jacks
G DMPORT
DMPORT Connects to a
jack DIGITAL MEDIA
PORT adapter
(page 70).
* You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV or projector (page 17).
www
.
10 GB
8
http://www.xiaoyu163.com
Name Function
O Playback
The letters (L, C, R, etc.)
channel
indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
L Front Left
R Front Right
C
Center (monaural)
SL Surround Left
SR Surround Right
S
Surround (monaural or the
surround components obtained
by Pro Logic processing)
SBL Surround Back Left
SBR Surround Back Right
SB
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When
surround speakers are set to
"NO" (page 40)
Sound Field: A.F.D. AUTO
SW
L C R
SL SR
Remote commander
You can use the supplied RM-AAU023
Remote Commander to operate the receiver
and to control the Sony audio/video
components that the remote is assigned to
operate (page 74).
1
TV ?/1
TV INPUT
?/1
AV ?/1
SLEEP DMPORT
wa 2
SYSTEM STANDBY
VIDEO1 VIDEO2 BD DVD
3
SAT TV SA-CD/CD TUNER
2CH A.F.D. MOVIE MUSIC
4
THEATRE
5
1 2 3
DVD/BD
MENU
w;
6
4 5 6
AUTO CAL
D.TUNING
7
7 8 9
D.SKIP 8
>10 MEMORY AMP MENU
-
ql
0/10 ENTER 9
CLEAR
TOOLS/ q;
DISPLAY OPTIONS MUTING
qk
qa
TV VOL
MASTER VOL
qj
qs
qh O
RETURN/EXIT MENU/HOME qd
TV CH – TV CH +
PRESET – REPLAY ADVANCE PRESET +
. < < >
TUNING – TUNING +
qf
m H M
TV FM MODE
qg
X x
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Rear panel
1 2 1 3
SAT IN DVD IN BD IN OUT
TV ANTENNA
OPTICAL
HDMI
IN AM SAT IN DVD IN VIDEO 1 IN MONITOR OUT
Y
SAT
IN
P B /
C
OPTICAL VIDEO VIDEO VIDEO VIDEO VIDEO B
IN IN OUT IN OUT
DVD
P R /
IN
C
R
COAXIAL
MONITOR COMPONENT VIDEO
DIGITAL (ASSIGNABLE)
SURROUND BACK SURROUND
R L R
AUDIO AUDIO AUDIO AUDIO AUDIO
OUT IN IN
IN IN OUT IN OUT
DC5V
0.7A MAX L
DMPORT
R
SA-CD/CD/CD-R TV SAT DVD VIDEO 1 SUB WOOFER
7 5 6 5
A DIGITAL INPUT/OUTPUT section
OPTICAL Connects to a DVD
IN jacks player, etc. The
COAXIAL jack
COAXIAL IN
provides a better
jack
sound quality (page
22, 23).
HDMI IN/ Connects to a DVD
OUT* jacks player, satellite
tuner, or a Blu-ray
disc player. The
image is output to a
TV or projector
while the sound can
be output from a TV
or/and speakers
connected to this
receiver (page 20).
B ANTENNA section
FM Connects to the
ANTENNA supplied FM wire
jack antenna (aerial)
(page 26).
AM Connects to the
ANTENNA supplied AM loop
terminals antenna (aerial)
(page 26).
Q Q
3 6 7 1 3 1 5
Name Function
A TV ?/1 Press TV ?/1 and TV (O) at
(on/standby) the same time to turn the TV
on or off.
AV ?/1
Press to turn on or off the
(on/standby) Sony audio/video components
that the remote is assigned to
operate (page 74).
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
B ?/1
Press to turn the receiver on or
(on/standby) off.
To turn off all Sony
components, press ?/1 and
AV ?/1 (A) at the same time
(SYSTEM STANDBY).
C Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components.
You can change the button
assignments following the
steps in "Changing button
assignments" on page 74.
D 2CH
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
E THEATRE
Press to enjoy optimal image
suited for movies and to
output the sound from the
speakers connected to this
receiver automatically.
co
Note
This button will only function
if your TV is compatible with
Theatre Mode.
.
Refer to the operating
instructions supplied with the
TV for details.
9 4 2 8
FRONT A
L
CENTER FRONT B
L R L
R
SPEAKERS
4
C COMPONENT VIDEO INPUT/
OUTPUT section
Y, P /C , P /C Connects to a
B B R R
Green
IN/OUT* jacks DVD player, TV,
(Y)
satellite tuner, etc.
Blue
You can enjoy
(P /C )
B B
high quality image
Red (page 17–23).
(P /C )
R R
D SPEAKERS section
Connects to the
speakers (page 15).
E AUDIO INPUT/OUTPUT section
AUDIO IN/ Connects to a Super
White (L)
OUT jacks Audio CD player,
CD recorder, etc.
Red (R)
(page 18).
AUDIO OUT Connects to a sub
Black
jack
woofer (page 15).
continued
9 GB
0 5 8 2 9 9 4 2 8
Name Function
F DVD/BD
Press to display the menu of
MENU the DVD or Blu-ray disc on
the TV screen. Then, use V, v,
B, b and
(Q) to perform
menu operations.
AUTO CAL Press to activate the Auto
Calibration function.
G D.TUNING
Press to enter direct tuning
mode.
D.SKIP Press to skip a disc when
using a multi-disc changer.
H
ENTER Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the TV, VCR or
satellite tuner.
MEMORY Press to store a station.
I AMP MENU
Press to display the menu of
the receiver. Then, use V, v,
B, b and
(Q) to perform
menu operations.
J TOOLS/
Press to display and select the
OPTIONS
options of the DVD player or
Blu-ray disc player.
Press TOOLS/OPTIONS and
TV (O) at the same time to
display the options applicable
to the Sony TV.
K MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound.
Press MUTING and TV (O)
at the same time to activate
the TV's muting function.
L TV VOL
Press TV VOL +/– and TV
a)
+ /–
(O) at the same time to adjust
the volume level of the TV.
m
MASTER Press to adjust the volume
a)
VOL + /– level of all speakers at the
same time.
continued
11 GB
9 9
9 9