Protective Featu Res - Audiovox ADC120 User Manual

.Insert the selected adapter plug into a vehicle's (or jump-
starter's) DC accessory outlet or airplane DC power outlet.
.Rotate the plug slightly to make sure there is good
contact.
S.The LED will light GREEN, indicating a proper connection .
.If the inverter does not work, make sure the ignition/
accessory switch is actually powering the accessory outlet.
Some vehicles require the ignition switch to be turned on .
.Plug the USB-powered device into the inverter's USB Power
Port and operate normally.
, Notes:This inverter1s USB Power Port does not support
ata communication. It only provides 5 volts/SOOmA DC
power to an external USB-powered device.
he USB power output is not controlled by the ON/OFF Power.
he USB power is always on when the Power Cord is
onnected to a 12-Volt DC power source. Remember to
isconnect the Power Cord from any power source when the
unit is not in use.
Protective Featu res
he inverter monitors the following conditions:
Low Battery Voltage-This condition is harmful to the
inverter, and could damage the power source, so the
inverter will automatically shut down when input voltage
drops below 10.5 Volts DC.
Input Voltage Too High-The inverter will automatically
shut down when DC input voltage exceeds 15 Volts, as
this can harm the unit.
Thermal Shutdown Protection-The inverter will auto-
matically shut down when the unit becomes overheated.
.Insert the selected adapter plug into a vehicle's (or jump-
starter's) DC accessory outlet or airplane DC power outlet.
.Rotate the plug slightly to make sure there is good
contact.
S.The LED will light GREEN, indicating a proper connection .
.If the inverter does not work, make sure the ignition/
accessory switch is actually powering the accessory outlet.
Some vehicles require the ignition switch to be turned on .
.Plug the USB-powered device into the inverter's USB Power
Port and operate normally.
, Notes:This inverter1s USB Power Port does not support
ata communication. It only provides 5 volts/SOOmA DC
power to an external USB-powered device.
he USB power output is not controlled by the ON/OFF Power.
he USB power is always on when the Power Cord is
onnected to a 12-Volt DC power source. Remember to
isconnect the Power Cord from any power source when the
unit is not in use.
Protective Featu res
he inverter monitors the following conditions:
Low Battery Voltage-This condition is harmful to the
inverter, and could damage the power source, so the
inverter will automatically shut down when input voltage
drops below 10.5 Volts DC.
Input Voltage Too High-The inverter will automatically
shut down when DC input voltage exceeds 15 Volts, as
this can harm the unit.
Thermal Shutdown Protection-The inverter will auto-
matically shut down when the unit becomes overheated.