Table of Contents
Advertisement
For safety reasons, the inverter will simply shut down if it is
overloaded. To restart the unit, simply reinsert the12-Volt
vehicle accessory adapter to reset.
Operation of the 110/120 Volt AC Outlet
1.Connect the Power Cord to the inverter.
2.Connect either the 12-Volt DC Vehicle Accessory Adapter
or the 12-Volt DC Airplane Adapter to the end of the 12-
Volt Power Cord.
3.lnsert the selected adapter Plug into a vehicle's (or other
12-Volt DC power source's) DC accessory outlet or airplane
DC power outlet.
4. Rotate the vehicle accessory plug slightly to make sure
there is good contact.
S.The LED in the inverter will light GREEN, indicating a proper
connection.
6.lf the inverter does not work, make sure the ignition/
accessory switch is actually powering the accessory outlet.
Some vehicles require the ignition switch to be turned on.
7.Plug the (110/120 Volt AC) appliance into the inverter1s
two or three-prong AC outlet and operate normally.
Note: The inverter will not operate appliances and
equipment that generate heat, such as hair dryers, electric
blankets, microwave ovens and toasters.
Operation of the USB Power Port
1.Connect the Power Cord to the inverter.
2.Connect either the 12-Volt DC Vehicle Accessory Adapter
or 12-Volt DC Airplane Adapter to the end of the 12-Volt
Power Cord.
For safety reasons, the inverter will simply shut down if it is
overloaded. To restart the unit, simply reinsert the12-Volt
vehicle accessory adapter to reset.
Operation of the 110/120 Volt AC Outlet
1.Connect the Power Cord to the inverter.
2.Connect either the 12-Volt DC Vehicle Accessory Adapter
or the 12-Volt DC Airplane Adapter to the end of the 12-
Volt Power Cord.
3.lnsert the selected adapter Plug into a vehicle's (or other
12-Volt DC power source's) DC accessory outlet or airplane
DC power outlet.
4. Rotate the vehicle accessory plug slightly to make sure
there is good contact.
S.The LED in the inverter will light GREEN, indicating a proper
connection.
6.lf the inverter does not work, make sure the ignition/
accessory switch is actually powering the accessory outlet.
Some vehicles require the ignition switch to be turned on.
7.Plug the (110/120 Volt AC) appliance into the inverter1s
two or three-prong AC outlet and operate normally.
Note: The inverter will not operate appliances and
equipment that generate heat, such as hair dryers, electric
blankets, microwave ovens and toasters.
Operation of the USB Power Port
1.Connect the Power Cord to the inverter.
2.Connect either the 12-Volt DC Vehicle Accessory Adapter
or 12-Volt DC Airplane Adapter to the end of the 12-Volt
Power Cord.
Advertisement
Table of Contents
