Selecting The Units; Selecting The Shooting Modes (Scene Files); Types Of Shooting Modes - Panasonic GP-VD151 Operating Instructions Manual

Selecting the units

Up to two units can be operated using one wireless remote
controller.
Select the unit (or units) to be operated from the wireless
remote controller.
Even when using only one unit, it must still be selected.

Selecting the shooting modes (scene files)

w Types of shooting modes
w
This unit has four preset shooting modes, each of which
corresponds to a set of circumstances in which the subject
will be shot.
Select the mode that satisfies the shooting conditions and
suits your preferences.
The settings can be changed by menu operations.
w p When using this unit while connected to a Panasonic HD
visual communication unit, use the "FullAuto" shooting
mode.
w p The results of the white balance and other adjustments
are stored in the memory separately by shooting mode.
Be absolutely sure to select the shooting mode before
making any adjustments.
Note
w p If "FullAuto" has been selected as the setting
for Scene on the camera menu, for example, all
the auto settings will be turned on, and manual
operations will no longer be possible for some of
the items.
1
Press the [CAM1] or [CAM2] button.
The unit's status display lamp blinks green when a
signal matched by the remote control ID has been
received, and it blinks orange when a signal that is not
matched by the remote control ID has been received.
FullAuto: Factory setting
The shutter speed and lens iris setting are adjusted
automatically.
Manual1
The settings of your preferences can be established
in line with the shooting scene, lighting and other
conditions.
Manual2
The settings of your preferences can be established
in line with the shooting scene, lighting and other
conditions.
Manual3
The settings of your preferences can be established
in line with the shooting scene, lighting and other
conditions.
6 (E)