Remote Control; Control Buttons On Dpf - HP df730v1 User Manual

Remote Control

You can access all of the DPF's features, and perform all of the functions by using the remote control. You
will be able to perform several functions with the remote control that are not possible with the top-back panel
control buttons.
Note: Before first time use, pull the plastic tab sticking out of the remote control. It protects the battery and the
remote control will not work unless it is removed.
1
2
3
4
5
6
7
Replace the Remote Control Battery
1. Hold the remote control with the buttons facing down.
2. Push and hold the small release tab while pulling the battery tray out.
3. Replace the "CR2025" Lithium battery on the tray with the positive (+) side facing up.
4. Push the tray back in until it clicks into place.

Control Buttons on DPF

You can perform many (but not all) of the DPF functions by using the control buttons located on the top-back panel
of the DPF. Their basic functions are the same no matter when you use them.
TIP: The instructions throughout this User Guide only reference the use of the remote control. However, if desired,
you can use the frame control buttons when these buttons are referenced:
Remote
ENTER
8
9
1 0
1 1
1 2
Frame Action
Scroll left
ENTER Play/Pause/Select object
Scroll right
EXIT Exit the current display, or go back a screen
Menu Access Setup screens
1 Start Slideshow
2 Exit or go back
3 Scroll up
4 Scroll previous
5 Play/Pause/Select object
6 Volume adjust higher or Select object
7 Volume adjust lower or De-select object
8 Access Setup screens (Menu)
9 Scroll forward
10 Scroll down
1 1 Rotate image
12 Enlarge image
5
Release tab