Motion Detection Setup Wizard - D-Link DCS-960L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure the motion
detection feature of your new D-Link Camera.
Click Next to continue.
Enabling the Video Motion option will allow your camera to use the motion detection
feature. You may draw areas for your camera to monitor for motion.
Enable Video Select this box to enable the motion detection feature of your camera.
Motion:
Sensitivity: Specifies how sensitive motion detection will be from 0% to 100%. A low
sensitivity setting means that there must be large changes between two images
in order to detect motion, and a high sensitivity setting means that even small
changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area that has flickering
lights or a window to the outside in view. High sensitivities may be useful when
monitoring an area that rarely changes, such as a storeroom or warehouse.
Drawing Mode: Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and
drag on the area that you would like to monitor for motion. Select Erase Motion
Area to clear a selected region and stop the camera from monitoring that area
of the picture.
Clear:
Clears all motion detection areas from the picture.
Click Next to continue.
D-Link DCS-960L User Manual

Motion Detection Setup Wizard

24