What If I Can't Access The Factory Reset Option; Changing Your Roku Channel Store Pin Preference; Getting System Updates; Checking For Updates On A Connected Tv - Insignia NS-43DR710NA17 Roku TV User Manual

What if I can't access the Factory Reset option?

It is possible that your TV might get into a state where you cannot access the various menus, including the menu option
that lets you perform a factory reset operation. If that happens, you can force your TV to reset by following these steps:
1 Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on your TV connector
panel.
2 Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on your TV's connector
panel.
3 Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
4 Release the RESET button. Your TV is now powered off.
5 Turn on your TV and proceed through Guided Setup. See

Changing your Roku Channel Store PIN preference

When you created your Roku account, you were given the opportunity to create a PIN code and to
specify when it must be used. If you created a Channel Store PIN and want to change it, or you don't
remember your PIN, or if you didn't create a Channel Store +PIN and want to add one, you can easily
make these changes.
1 On a computer, tablet, or smartphone, use your web browser to go to https://my.roku.com.
2 Enter your email address and password to sign in. After signing in, the My Account page appears.
3 Under PIN Preference, click Update to open the Choose Your PIN Preferences page.
4 Skip this step if you just want to change your PIN. Otherwise, choose the option you prefer from
among those listed:
• Require a PIN to make purchases or to add any item from the Channel Store.
• Require a PIN to make purchases.
• Do not require a PIN to make purchases.
5 If you choose either of the first two options, enter your PIN in the appropriate boxes.
6 Click Save Changes to save your changes and return to the My Account page. Note that your current
setting is described under PIN Preference.

Getting system updates

If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to
time. You don't need to do anything. But if you are aware that an update is available and you don't want to wait until
your TV updates itself, you can manually check for updates.
If your TV is not connected to the Internet, you can still get updates by using a USB flash drive.
You can download an updated User Guide that matches your Roku TV software version from the Insignia web site at:
www.insigniaproducts.com/support.html
To determine your current Roku TV software version, go to Settings > System > About, and then press OK or navigate
to the right.

Checking for updates on a connected TV

If you're one of those people who has to have the latest, most up-to-date features the moment they are available, you
can check for updates as often as you want.
To check for updates, navigate to Settings > System > System update, and then select Check now. Your TV responds
either with a message saying that your TV is up to date, or with a message saying that an update is available.
Follow the instructions on the screen to install the system update.
Note
Sometimes system updates install new system software, and other times they install
new features for streaming channels. Therefore, you won't always see a change in the
behavior of your TV after a system update.
74
Setting up your TV
www.insigniaproducts.com
43"/50"/55" 4K / 2160p, 60Hz, LED Roku TV
on page 36.