Display Of Standby Led Flash Count; Self-Diagnostic Screen Display - Sony KLV-26BX320 Service Manual

DISPLAY OF STANDBY LED FLASH COUNT

[ FLASH COUNT ]
6 times
8 times
0.3
LED ON
LED OFF 0.3

SELF-DIAGNOSTIC SCREEN DISPLAY

For errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes out" that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Note: The screen display of SELF-DIAGNOSIC SCREEN DISPLAY confirms from factory menu.
[How to use the remote commander]
KLV-26/32/37/40BX320,321,323,325,420,421,423,425(CH)
sec.
LED OFF
sec.
2
sec.
5
DISPLAY Channel
Function
Factory mode on <Display><5><Vol Up><Power>
Menu up/down <
Data change <
Execute <
Volume TV POWER
The flow of control
> / < >
> / < >
>
SELF DIAGNOSIS FUNCTION
8