Set The Clock And Date; Set The Initial Settings - Kenwood KDC-300UV Instruction Manual

GETTING STARTED
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the
knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the
knob.
6
Turn the volume knob to select [12H] or [24H], then press the
knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the
knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then
press the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1
Press repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
4
DISPLAY
EASY MENU
TUNER SETTING
PRESET TYPE
SYSTEM
KEY BEEP*
SOURCE SELECT
BUILT-IN AUX
P-OFF WAIT
CD READ
.
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
FACTORY RESET
.
* Not applicable if 3-way crossover is selected.
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain
as [COLOR SELECT] color. ( 12)
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; – – –: Cancels
1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
YES: Resets the settings to default (except the stored station). ;
NO: Cancels.
Default: XX