Operating Instructions - Haier AE092FCAKA Instruction Manual

Operating Instructions

Recommendations
Use COOL in summer.
Use HEAT in winter.
Use DRY in spring,autumn and in damp climate.
AUTO
SET
AM
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display
(Not Timer setting). Power indicator lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
AUTO COOL DRY
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
Every time the button is pressed, temp. setting
increases 1 C.
If button is kept depressed, temp.setting will
increase quickly.
Every time the button is pressed, temp. setting
decreases 1 C.
If button is kept depressed, temp. setting will
decrease quickly.
Unit will start running to reach the temp. setting
on LCD.
(4) Fan speed selection
Auto running: During the Auto running mode, air conditioning running and can auto-select the cooling, heating, fan
mode according to the room temperature.
Fan running: The AC only have air supply running no cooling and heating running at the condition, AC can't have auto
air supply running, and can't display the setting temperature value on the LCD.
During the heating running, after start the AC, in order to prevent cooled air, AC can stop for a while before send heat
air.
During the dehumification running, when the room temp. setting temp. , not setting condition according to the air speed.
FAN SWING
MODE
HEALTH
TEMP
2 4
CLOCK SET
3
TIMER SLEEP
FILTER RESET
RESET
5
ON/OFF
1
Press FAN button. For each press,
fan speed changes as follows:
Wire controller
Remote controller
HEAT FAN
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD.
All indicators go out.
Vertical flap closes automatically.
Hints
Wire controller can memorize each operation status.
When starting it next time, just press ON/OFF button
and unit will run in previous status.
12
AUTO RUN, COOL,HEAT and DRY operation
T E M P
ON
OFF
SWING
5
MODE
HEALTH FRESH
CLOCK
TIMER
RESET
LOW MID
MID
LOW
Unit runs at the speed displayed on LCD.In HEAT
mode, warm air will blow out after a short period
of time due to cold-draft prevention function.
In DRY mode, when room temp. becomes 2 C higher
than temp. setting, unit will run intermittently at
LOW speed regardless of FAN setting.
FAN
SLEEP
SET
LIGHT LOCK
AUTO
HIGH AUTO
A
U
T
O
AUTO
HIGH