Table of Contents
Advertisement
Step 7
Mount the WLAN USB module (EMIO-1530 802.11b/g or EMIO-
1533 802.11n) on the bottom side of chassis top cover with two
screws.
Step 8
Connect the WLAN USB cable to the mini connector on the WLAN
module and the grounding cable to the screw area. Then connect
the WLAN antenna cable to the micro RF connector on the WLAN
USB module (EMIO-1530 802.11b/g or EMIO-1533 802.11n) as
indicated in the figure below.
Step 9
Reinstall the top cover of the ARTiGO-A1150.
30
Advertisement
Table of Contents
